Tips to extend the service life of non-standard automation equipment

Providing sufficient smoothing agent on the outside of the off-standard automation prevents damage to the oil film, thus reducing wear between off-standard automation parts.

The non-standard automation smoothing agent is between the frictional exterior, due to hard grain wear, and wear formed by galling and tearing between the metal exterior. Providing sufficient smoothing agent on the exterior of the non-standard automation can prevent damage to the oil film, thus reducing wear between non-standard automation parts.

1.Lower the temperature of the machine

Non-standard automation smoothing agent can reduce the coefficient of friction and frictional heat. We operate the non-standard automation to inhibit the friction converted into heat, part of which is dispersed outward from the body, and the other part reduces the temperature of the non-standard automation from time to time. Non-standard automation can take away the heat generated by friction through the concentrated circulation of liquid smoothing agent to cool it down and make the non-standard automation control operate within the required temperature range.

2.Avoid corrosion of non-standard automation and maintain metal appearance

The appearance of non-standard automation machinery will inevitably come into contact with the surrounding natural media, making the appearance of non-standard automation machinery metal rust damage. Especially, the low temperature lathe in metallurgical plant and the corrosion wear in chemical plant appear more serious in non-standard automation.

Smooth oil or grease has no corrosive effect on metal, but insulates it from moisture in humid air and corrosion by harmless media. We can play the role of non-standard automation in corrosion and rust prevention by applying a layer of oil with anticorrosion and rust inhibitor on the metal surface of non-standard automation.